For DJI AVATA Storage Bag Hard Shell Waterproof Shoulder Bag Backpack(Black EVA Lining)
155.52€
Παράδοση σε 4 - 10 ημέρες
1. PC hard shell front face, environmentally friendly and strong, nylon back, wear-resistant and scratch-resistant, water-repellent
2. Large space, upper and lower layer design, can hold drone/battery/remote controller/motion controller/data cable/propeller/Goggles 2 or FPV Goggles V2
3. U-shaped three-dimensional ventilated back, effectively protecting the spine, comfortable to carry
4. Material: PC+Nylon
5. Inside: EVA lining
6. Dimensions: 30 x 13 x 40cm
7. Weight: 1397.5 grams
| Βάρος | 1.504 kg |
|---|
Σε απόθεμα
Σχετικά προϊόντα
For DJI Mavic Mini 4726F Wing Propeller Blade Drone Accessories, Spec: 2pairs Orange Edge
1. Compact shape, lower noise
2. The propeller designed for DJI Mavic Mini is light weight, good performance and durable;
3. Provide strong pulling force for Mavic Mini.
Parameter:
1. Main material: PC
2. Net weight: 0.7g (single piece), 2.8g (1 pair), 5.6g (2 pairs), 11.2g (4 pairs)
3. Product size: 11.938 × 6.604cm (diameter × pitch)
4. Packing method: 2 pairs in boxes, 4 pairs in bags
Packing list:
Propeller (set) x 1
Screw (set) x 1
Screwdriver x 1
For DJI Mini 4 Pro 4pairs Drone Propeller Blades 6030F Props Replacement Parts
1. High toughness material, high aerodynamic efficiency;
2. High-quality PC, durable;
3. The single chip weighs only 0.9g, has low power consumption, strong endurance and stable flight.
4. Quick disassembly and assembly, saving time and effort.
5. Suitable for Mini 4 Pro 6030F propeller
6. Main material: PC
7. Attribute: orange edge
8. Net weight: 10.7g (2 pairs), 18.2g (4 pairs)
9. Product size: 7.5 x 1.8cm
10. Packaging method: boxed (pack of 2 pairs), bag (pack of 4 pairs)
Note: When replacing propellers, you must use propellers from the same package. Do not mix them with propellers from other packages.
?
For DJI Neo Fly More Combo BKANO Storage Bag Portable Shoulder Bag With 2 Front Pockets
1. A shoulder bag designed specifically for DJI Neo, which fits the device precisely and can store the body, remote control, battery manager, 7 batteries (including 1 on the body), joystick, etc.
2. Two pockets on the front of the bag make it easy to take out your phone or other items
3. Water-repellent fabric, which can block water in a short time, so you don't have to worry about the contents getting wet
4. The inside of the bag is equipped with a shockproof EVA sponge lining to prevent scratches and collisions between devices
5. Webbing handle for easy carrying
6. Material: nylon outer shell, EVA liner
7. Size: about 29 x 22 x 10cm
8. Weight: about 450g
9. Note: The product only contains the storage bag, not other items
Sunnylife Drone+Remote Control Protective Sticker For DJI Mini 3 Pro RC Version( Skateboard)
1. Exquisite pattern printing, a variety of cool patterns are optional.
2. Outdoor ink, durable and beautiful, not easy to fade.
3. The sticker can be removed, and it can be pasted repeatedly without leaving glue.
4. There is an air guide groove on the back, which is convenient for handling air bubbles and making it easier to fit.
5. Applicable models: suitable for DJI Mini 3 Pro Standard Edition/Mini 3 Pro with Screen
6. Precautions for use:
-1. First clean the fuselage with the film accessories bag, do not have moisture and dust on the surface, then compare the sticker and the fuselage, select the corresponding position of each sticker, tear it off and stick it on the corresponding position Tear off and repeat the paste.
-2. If there is a raised part on the edge, please press it with your hand and heat it with a hot hair dryer, and press it until it completely fits the body.
Sunnylife Drone+Remote Control Protective Sticker For DJI Mini 3 Pro RC Version( Time Gate)
1. Exquisite pattern printing, a variety of cool patterns are optional.
2. Outdoor ink, durable and beautiful, not easy to fade.
3. The sticker can be removed, and it can be pasted repeatedly without leaving glue.
4. There is an air guide groove on the back, which is convenient for handling air bubbles and making it easier to fit.
5. Applicable models: suitable for DJI Mini 3 Pro Standard Edition/Mini 3 Pro with Screen
6. Precautions for use:
-1. First clean the fuselage with the film accessories bag, do not have moisture and dust on the surface, then compare the sticker and the fuselage, select the corresponding position of each sticker, tear it off and stick it on the corresponding position Tear off and repeat the paste.
-2. If there is a raised part on the edge, please press it with your hand and heat it with a hot hair dryer, and press it until it completely fits the body.
Sunnylife Drone+Remote Control Protective Sticker For DJI Mini 3 Pro RC Version(Carbon Red)
1. Exquisite pattern printing, a variety of cool patterns are optional.
2. Outdoor ink, durable and beautiful, not easy to fade.
3. The sticker can be removed, and it can be pasted repeatedly without leaving glue.
4. There is an air guide groove on the back, which is convenient for handling air bubbles and making it easier to fit.
5. Applicable models: suitable for DJI Mini 3 Pro Standard Edition/Mini 3 Pro with Screen
6. Precautions for use:
-1. First clean the fuselage with the film accessories bag, do not have moisture and dust on the surface, then compare the sticker and the fuselage, select the corresponding position of each sticker, tear it off and stick it on the corresponding position Tear off and repeat the paste.
-2. If there is a raised part on the edge, please press it with your hand and heat it with a hot hair dryer, and press it until it completely fits the body.
Sunnylife Drone+Remote Control Protective Sticker For DJI Mini 3 Pro RC Version(Cute Pig)
1. Exquisite pattern printing, a variety of cool patterns are optional.
2. Outdoor ink, durable and beautiful, not easy to fade.
3. The sticker can be removed, and it can be pasted repeatedly without leaving glue.
4. There is an air guide groove on the back, which is convenient for handling air bubbles and making it easier to fit.
5. Applicable models: suitable for DJI Mini 3 Pro Standard Edition/Mini 3 Pro with Screen
6. Precautions for use:
-1. First clean the fuselage with the film accessories bag, do not have moisture and dust on the surface, then compare the sticker and the fuselage, select the corresponding position of each sticker, tear it off and stick it on the corresponding position Tear off and repeat the paste.
-2. If there is a raised part on the edge, please press it with your hand and heat it with a hot hair dryer, and press it until it completely fits the body.
Sunnylife Drone+Remote Control Protective Sticker For DJI Mini 3 Pro RC Version(Irimitent Eagle)
1. Exquisite pattern printing, a variety of cool patterns are optional.
2. Outdoor ink, durable and beautiful, not easy to fade.
3. The sticker can be removed, and it can be pasted repeatedly without leaving glue.
4. There is an air guide groove on the back, which is convenient for handling air bubbles and making it easier to fit.
5. Applicable models: suitable for DJI Mini 3 Pro Standard Edition/Mini 3 Pro with Screen
6. Precautions for use:
-1. First clean the fuselage with the film accessories bag, do not have moisture and dust on the surface, then compare the sticker and the fuselage, select the corresponding position of each sticker, tear it off and stick it on the corresponding position Tear off and repeat the paste.
-2. If there is a raised part on the edge, please press it with your hand and heat it with a hot hair dryer, and press it until it completely fits the body.